Do your headlights have a foggy-hazy look to them? Maybe you’ve noticed your visibility at night or during the rainy times is much lower (thank you Clarksville weather). No worries, you don’t have to replace them, nor do you have to open up your lens (as many people think the haziness is from the inside of the lens. Most of the time it’s not)

By sanding your headlights, we’re removing the old layer of clear coat that has failed and oxidised (which leads to the yellow-foggy look). Then we’ll compound and polish to bring them back to a like-new condition. Inside the polish, it will add a up to a 1-year durability of protection.

The Ultimate Headlight Restoration Process

We don’t use a generic headlight repair kit that you find at your local auto parts store. We go through a full 3-step sanding, compounding, polishing, and protection process to offer the best results.

1. Start sanding headlight with 800 grit

• The first round of sanding is where the oxidisation is removed. You'll see a lot of slurry come off.

  2. Sand headlight with 1,000 grit

  As we move up the process, we remove less oxidisation. The focus now is to refine the sanding marks.

  3. Sand headlights with 3,000 grit

  This is the final sanding step. The headlight is looking much clearer.

  4. Compound the headlights

  Using a cutting disc, compound, and machine polisher, we'll remove the sanding marks.

  5. Polish the headlights

  Finally, we'll refine the cutting step to bring out maximum clarity with a light polish and polishing pad. For protection, our polish applies a 1-year protective layer to provide durable protection.